Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Associations, Services and Universities
LeftNav
Automotive Industry
LeftNav
Design & Manufacturing Services
LeftNav
Education, Training and Professional Services
LeftNav
Electrical Components
LeftNav
Electronic Components
LeftNav
Energy
LeftNav
Fastening and Joining
LeftNav
Laboratory Equipment
LeftNav
Machine Building & Automation
LeftNav
Maintenance, Repair and Overhaul (MRO)
LeftNav
Materials & Processes
LeftNav
Materials Processing and Machine Tools
LeftNav
Mechanical Components
LeftNav
Packaging
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
 
 
News

Field-attachable, external thread mPm DIN valve connectors - DIN Form B, C and Micro versions with electronic circuitry

Molex : 03 April, 2013  (New Product)
Molex is extending its offering of Brad mPm external thread, field attachable DIN valve connectors with the introduction of DIN Form B, C and Micro versions with electronic circuitry. Options include a bi-polar Light Emitting Diode (LED) power on indicator, LED with blocking diodes to protect against over voltage or peaks when switching off, and bi-polar LED with a voltage-dependent resistor (VDR) to protect supply and switch.
Field-attachable, external thread mPm DIN valve connectors - DIN Form B, C and Micro versions with electronic circuitry

The Brad mPm range of DIN valve connectors from Molex conform to Industry Standard EN 175301-803 (formerly DIN 43650). This is the standard for a series of electrical connectors that is commonly used with solenoid valves, especially those used on valves in hydraulics and pneumatics systems.
 
The ergonomic external-nut design on the mPm DIN valve connector provides greater and consistent torque for a more uniform seal between connector and cable, and 20% greater cable-retention force over internal-nut designs for increased reliability. When mated, the Molex mPm DIN connectors achieve a sealing performance from dust and water to IP67, opening up a greater range of application opportunities in more rugged environments.
 
Brad mPm DIN connectors from Molex are supplied “ready-to-use” disassembled in single sets, or as bulk components, which saves customers disassembly time per part and costs. They can accommodate PG9 and PG11 cable and up to 9mm cable outer diameter and, since one size fits all, the customer can reduce its connector inventory. To further reduce labour, pre-terminated and overmoulded mPm DIN valve connectors are also available in standard lengths.

“The additional built-in circuit protection and LED indicators meet a wide range of customer design requirements; standard circuitry options available include LED and bi-polar LED indicators, blocking diodes and VDRs,” said Gilberto Rizzo, integrated products division, AEP business unit, Molex. “In comparison to similar products on the market, the internal volume of the DIN Form C housing is increased by 30% with no change to the external dimensions of the connector; this improves overall handling, wire routing and speed of assembly over internal nut versions and, with no impact on space required, can be used as a drop-in replacement.”

Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 ProManufacturingZone.com
Netgains Logo