The Netbiter EC350 is the first in a new generation of Netbiter gateways. It connects to industrial machinery via Modbus (serial or Ethernet), SNMP, EtherNet/IP or I/O and sends data to the cloud-based Netbiter Argos server via Ethernet or cellular communications.
While previous generations of Netbiter gateways have been able to communicate via GSM/GPRS, the new Netbiter EC350 is enhanced to also communicate over 3G networks. The 3G communication provides increased performance compared to GPRS and also increases the geographical cellular coverage as it is possible to install the gateway where 3G is the only available network. With support for 5 different 3G bands, the Netbiter EC350 is a product suitable for the global market.
The Netbiter EC350 will support Remote Access. This means that users can open up a secure connection to remote machinery and configure or operate it from any location using standard software applications. Remote access provides a secure data tunnel to the remotely located equipment. For example, with a Netbiter connected to a PLC, it is possible to perform remote debugging or programming of the PLC from any location, using the same PLC configuration software as usual. Remote access functionality will be available as of Q1, 2014.
The new gateway has about 20 times more processing power than the previous gateways and an extended memory capacity supporting up to 512MB Flash and 1024MB RAM. Two fully separated Ethernet Interfaces (WAN and LAN) makeit possible to provide secure communication to the field installation. A built-in GPS receiver makes it suitable for mobile fleet management applications and the increased number of analog and digital I/Os allow signals and sensors to be directly connected to the Netbiter gateway. Six status LEDs also provide detailed diagnostics.
|