Bus couplers for the I/O system 1000 are available for PROFINET, EtherCAT, CANo-pen, PROFIBUS, DeviceNet and Modbus TCP. From the bus coupler complete I/O stations can be built up by adding 12.5mm wide modules, all DIN rail mounted and internally connected by a backplane bus. Up to 64 modules can be added with ana-log and digital I/O plus powerful options for relay output, counters, temperature measurement and SSI encoder evaluation. Where the backplane bus with its integrated 24V supply has insufficient power for larger I/O stations, additional power supply modules can be added. Sensors requiring 24V three wire connection have a 10A supply module available.
The I/O system 1000 was designed with high priority on ease of use. The two piece stepped design is easy to connect and the electronics can be replaced without dis-turbing the wiring. Bright LEDs and clear labelling speed up diagnostics and commis-sioning. Mounting of the modules required no tools and can be done either singly or as a complete block. Also available is an EMC shield which clips easily into the base of the modules.
With baud rates up to 100 Mbit/s, the Lenze I/O system 1000 suits fast motion such as found with robots, packaging machines and others using real-time architectures. Despite high performance, the system represents an economic solution that is par-ticularly time saving and easy to handle. The scope of the product range allows use where simple or complex I/O stations are required.
|